Disclaimer:

This blog explains how I keep bees. It works for me, it might not work for you. Use my methods at your own risk. Always wear protective clothing and use a smoker when working bees.

Search This Blog

Saturday, August 30, 2008

Cut Comb ez comb honey


This is how the frames looked when I pulled the super.


I used a stainless comb cutter to cut out the comb. Note the brown propolis on the end bars and on the edge of the top bars.. The bees put propolis wherever there is a crack.


The comb is placed on a cookie cooling rack with a pan underneath to drip for 24 hours.


I put three cut comb frames with thin surplus foundation on when the nectar flow was going. They fit in a medium super.

My colonies produced three frames of cut comb that I put on in mid July. They were not full, but there was some comb.
I pulled the supers using Honey Robber and a fume board.
The comb honey frames were pulled. I set a frame on a cutting board. I used a serrated knife to cut the comb off of the frame. Taking the 3-7/8" comb cutter from a pan of hot water. I wipe off the water then cut through the comb.
Cleaning the cutter off after every cut.
The comb is placed on a cooling rack above a cookie sheet to drip for 24 hours. The next day I put them in clam shell containers.
This is the easiest type of comb honey to make. The frames fit in a medium super. The only eqiupment needed is the frames, foundation, comb cutter and clam shells.